maintenance-free dry operation

High abrasion resistance

Insensitive to dirt and dust

Over 650 dimensions available from stock

cost effective

For extremely high operating times in continuous operation

Low coefficient of friction

Extremely high abrasion resistance

Suited for rough shafts and stainless steel shafts

Dirt resistant

Low wear against many shaft materials

Low coefficients of friction in dry operation

vibration dampening

Good chemical resistance

Best performance with soft shafts

Low humidity absorption

For operating temperatures from
-100°C to + 250°C in continuous operation

Excellent resistance against chemicals

High compressive strength

Very low humidity absorption

Extremely wear resistant for the entire temperature range

Excellent vibration dampening

Insensitive to misalignment

High impact strength

For greater wall thicknesses according to DIN 1850

Dirt can accumulate

Low water absorption

High load capacity

Cost-effective

Low wear rates

Many-sided application at static load

Maintenance-free, self lubricating

Cost-effective

Insensitive to dirt

Insensitive to vibrations

Lubrication and maintenance-free

Lowest humidity absorption

wear-resistant

Cost-effective

Lubrication and maintenance-free

Low-cost-material for large volumes

Low coefficients of friction

Media resistant

Lowest humidity absorption

Lubrication and maintenance-free

Low coefficients of friction

Media resistant

Lowest humidity absorption

PTFE free

Good abrasion resistance

Low coefficients of friction in dry operation

Very cost efficient

Lowest humidity absorption

Lubrication and maintenance-free

Very good c.o.f. for low or medium loads

Media resistant

Slightly higher temperatures than with iglidur® J

Longer life time - even on polymer shafts and other special cases.

Extremely high service life on anodized aluminum

Low adhesion factor

Low wear

For low to medium loads

Specially made for fast rotating applications

Very low coefficients of friction

Excellent wear resistance

Low coefficients of friction at high speeds

For low loads

Very cost efficient

vibration dampening

Lowest humidity absorption

Lubrication and maintenance-free

Long term service temperature up to +250°C

Up to 50% better press fit as iglidur® X

High compressive strength

Very good chemical resistance

PTFE free

Extreme wear resistance with soft shafts and in high temperatures up to 200°C

Excellent chemical resistance

High elasticity

Excellent wear resistance especially with high loads

High thermic stability

For extreme loads

Also for high surface speeds

Insensitive to edge loads

For underwater application at high temperatures

For fast and continuous movements

Usable underwater

Maintenance-free solution

For high temperatures

Chemical resistant

Low adhesion factor

Best wear-resistance

High temperature resistance
-40°C to 200°C

High resistance to chemicals

Wear-resistant - especially under water

High temperature resistance
-40°C to +200°C

High resistance to chemicals

Usable underwater

Cost-effective

Chemical resistant

For high temperatures

High wear resistance in extreme ambient conditions

Very low coefficient of friction

High resistance to temperature and chemicals

For applications in the engine compartment

Excellent abrasion resistance, especially with high loads

Suitable for extreme p x v values

Good coefficients of friction

Insensitive to dirt

Sound isolation

Extremely high elasticity

Potential sealing function

Electro-conductive

High compressive strength

Good temperature resistance

High p x v value

Good chemical resistance

Silent operation

Good abrasion resistance

Maintenance-free solution

For underwater applications

For fast and continuous rotations

High holding times

The iglidur® A180 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA)

For direct use in the vicinity of (or in contact with) food or drugs

For wet areas

Complies with the specifications of the BfR

Suitable for the direct contact with food and drugs

Good abrasion resistance

Silent operation

The iglidur® A200 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA)

For direct use in the vicinity of (or in contact with) food or drugs

For low speeds

Free from undesirable and banned ingredients of the tobacco industry

The iglidur® A500 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA)

For direct use in the vicinity of (or in contact with) food or drugs

Resistant to temperature from -100°C to + 250°C

Extremely high resistance to chemicals

Absolutely maintenance-free

Simple installation and replaceable gliding elements

High wear resistance

For very high loads and high stiffening

Stainless steel versions available

Extensive accessories

Maintenance- and lubricant-free

High corrosion-resistance

For temperatures up to 150°C